Filter
Top Products
Page 93CPV350
18.14.1 Voice Scramble Operation
1. Turn on the transceiver.
2. Select a channel that was programmed for scrambler mode (“VS” will appear in the “VHF
Radio” window on the display).
3. If a channel is not set for the voice scrambler, the display will be as shown in the
illustration at the right (“VS” will disappear from the display).
4. If a voice scrambler is canceled temporarily in the “SETUP” menu, the display will be
as shown in the illustration at the right.
5. Monitor the channel before transmitting.
6. Transmit the voice message. The signal sent will be scrambled.