Filter
Top Products
Page 13GX5500S
8.6 CHANGING THE TIME LOCATION
Set the radio show UTC time or local time with the offset inputted in section 8.5
CHANGING THE GPS TIME.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
Time DisplayTime Display
Time DisplayTime Display
Time Display” in
the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select “
UTCUTC
UTCUTC
UTC” or
“
LocalLocal
LocalLocal
Local.”
5. Press the
[
ENT
]
key to store the selected setting.
6. Press the
[
CLR
]
key to return to the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup”
menu, then press the
[
CLR
]
key again to return to
radio operation.
8.7 CHANGING COG TO TRUE OR MAGNETIC
Allows the GPS Course Over Ground to be selected to show in True or Mag-
netic. Factory default is True however following the steps below the COG can
be changed to Magnetic.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
MagneticMagnetic
MagneticMagnetic
Magnetic” in the
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select “
Mag-Mag-
Mag-Mag-
Mag-
neticnetic
neticnetic
netic” or “
TrueTrue
TrueTrue
True.”
5. Press the
[
ENT
]
key to store the selected setting.
6. Press the
[
CLR
]
key to return to the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup”
menu, then press the
[
CLR
]
key again to return to
radio operation.