GX5500SPage 62
12.7 SCAN TYPE
This selection is used to select the scan mode between “Memory Scan” and
“Priority Scan.”
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
SCAN TypeSCAN Type
SCAN TypeSCAN Type
SCAN Type” in the
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select “
PriorityPriority
PriorityPriority
Priority
SCANSCAN
SCANSCAN
SCAN” or “
Memory SCANMemory SCAN
Memory SCANMemory SCAN
Memory SCAN.”
5. Press the
[
ENT
]
key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.
12.8 SCAN RESUME TIME
This selection is used to select the time the GX5500S waits after a transmis-
sion ends before starting scanning.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
SCAN ResumeSCAN Resume
SCAN ResumeSCAN Resume
SCAN Resume” in
the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select the de-
sired resume time. The resume time can be set to
“
1sec1sec
1sec1sec
1sec” through “
5sec5sec
5sec5sec
5sec,” or “
OffOff
OffOff
Off.” In the “
OffOff
OffOff
Off” selection,
the scanner will resume after the other station stops
transmitting (carrier drops).
5. Press the
[
ENT
]
key to store the selected setting.
6. To exit this menu and return to radio operation mode press the
[
16/9
]
key.