Filter
Top Products
Page 37GX5500S
THIS NUMBER MUST BE PROGRAMMED INTO THE RADIO TO OPERATE
THE GX5500S DSC FUCTIONS.
How can I obtain an MMSI assignment?
In the USA, visit the following websites to register:
http://www.boatus.com/mmsi/ or
www.seatow.com/boatingsafety/mmsiinfo.htm.
In the Canada, visit
http://strategis.ic.gc.ca/epic/site/smt-gst.nsf/vwapj/cpc_2307e.pdf/$FILE/
cpc_2307e.pdf
11.2.2 Programming the MMSI
WARNING
A user MMSI can be inputted only once. Therefore please be careful
not to input the incorrect MMSI number. If the user needs to change
the MMSI number after it has been entered, the radio will have to be
returned to Factory Service. Refer to the section “15.2. FACTORY SER-
VICE.”
1. Press and hold down the
[
CALL
(
MENU
)]
key
until the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to the left to
select “
DSC SetupDSC Setup
DSC SetupDSC Setup
DSC Setup” menu.
3. Press the
[
ENT
]
key, then select “
User MMSIUser MMSI
User MMSIUser MMSI
User MMSI”
with the CHANNEL selector knob.
4. Press the
[
ENT
]
key.
5. Turn the CHANNEL selector knob or press the
[
UP
(
S
)]
/
[
DOWN
(
T
)]
key on the microphone
to select the first number of your MMSI, then
press the
[
ENT
]
key to step to the next number.
6. Repeat step 5 to set your MMSI (nine digits).
7. When finished programming the number, press
and hold the
[
ENT
]
key. Appears the confirma-
tion message on the display. Set your MMSI
again, then press and hold the
[
ENT
]
key.
8. Press the
[
ENT
]
key to store the number in
memory.
9. Press the
[
CLR
]
key twice to return to the “
Ra-Ra-
Ra-Ra-
Ra-
dio Setupdio Setup
dio Setupdio Setup
dio Setup” menu, then press the
[
CLR
]
key
again to return to radio operation.