Filter
Top Products
GX5500SPage 86
14.5.1 Changing the display to show Lat/Lon or Time and SOG
Factory default is “Your Vessel’s Current Position,” however, following the steps
below the GPS Information can be changed to “Course Over Ground (COG).”
1. Press and hold down the
[
CALL
(
MENU
)]
key until “
RADIORADIO
RADIORADIO
RADIO
SETUPSETUP
SETUPSETUP
SETUP” menu appears.
2. Press the
[
ENT
]
key, then select “
NAV DISPLAYNAV DISPLAY
NAV DISPLAYNAV DISPLAY
NAV DISPLAY” with the
[
S
]
/
[
T
]
key.
3. Press the
[
ENT
]
key.
4. Press the
[
T
]
or
[
S
]
key to select “
PosPos
PosPos
Pos (Your Vessel’s Cur-
rent Position)” or “
CruCru
CruCru
Cru (Course Over Ground).”
5. Press the
[
ENT
]
key to store the data entered, then press
the
[
16/9
]
key to exit this menu and return to radio opera-
tion mode.
14.5.2 External Speaker AF Selection
The
AF SELECTAF SELECT
AF SELECTAF SELECT
AF SELECT menu allows you to set the audio output level of the VH-310’s
External Speaker to a fixed level regardress of the VOL level setting of the VH-
310, which is useful when using the STANDARD HORIZON MLS-310 10W
amplified speaker with on/off volume control.
1. Press and hold down the
[
CALL
(
MENU
)]
key until “
RadioRadio
RadioRadio
Radio
SetupSetup
SetupSetup
Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
AF SELECTAF SELECT
AF SELECTAF SELECT
AF SELECT” with the
[
S
]
/
[
T
]
key.
3. Press the
[
ENT
]
key.
4. Press the
[
S
]
or
[
T
]
key to select “
PrPr
PrPr
Pr” (External Speaker
Level is “Fixed”) or “
PoPo
PoPo
Po” (External Speaker Level is “Adjust-
able”).
5. Press the
[
ENT
]
key to store the data entered, then press
the
[
16/9
]
key to exit this menu and return to radio opera-
tion mode.