Page 55GX5500S
tory.” This directory uses the “Individual Direc-
tory” information.
4. Turn the CHANNEL selector knob to select a
name in the directory, then press the
[
ENT
]
key.
5. Press the
[
ENT
]
key again to send your posi-
tion to the selected vessel.
6. Press the
[
CLR
]
key twice to return to the “
Ra-Ra-
Ra-Ra-
Ra-
dio Setupdio Setup
dio Setupdio Setup
dio Setup” menu, then press the
[
CLR
]
key
again to return to radio operation.
Manual Calling
You may enter an MMSI number manually to contact without the Setting up the
Individual / Position Call Directory.
1. Press the
[
CALL
(
MENU
)]
key. The “
DSC CallDSC Call
DSC CallDSC Call
DSC Call
MenuMenu
MenuMenu
Menu” will appear in the display.
2. Turn the CHANNEL selector knob to select the
“
Pos ReportPos Report
Pos ReportPos Report
Pos Report.”
3. Press
[
ENT
]
key to show the “Position Send
Directory.” This directory uses the “Individual
Directory” information.
4. Turn the CHANNEL selector knob to select
“
ManualManual
ManualManual
Manual,” then press the
[
ENT
]
key.
5. Enter the MMSI number (nine digits: first digit
permanently set to “0”) which you want to con-
tact by the keypad, then press the
[
ENT
]
key.
6. If a mistake was made entering in the MMSI
number repeat pressing the
[
H/L
]
key until the wrong
number is selected, then enter the correct number.
7. When finished entering the MMSI number, press and
hold the
[
ENT
]
key.
8. Press the
[
ENT
]
key to send your position to the
selected vessel.