Filter
Top Products
GX5500SPage 44
The GX5500S has the capability to turn off the Individual call ringer.
1. Press and hold down the
[
CALL
(
MENU
)]
key
until “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select
“
DSC SetupDSC Setup
DSC SetupDSC Setup
DSC Setup” menu.
3. Press the
[
ENT
]
key, then select “
DSC BeepDSC Beep
DSC BeepDSC Beep
DSC Beep”
with the CHANNEL selector knob.
4. Press the
[
ENT
]
key.
5. Turn the CHANNEL selector knob to select “
In-In-
In-In-
In-
dividualdividual
dividualdividual
dividual” if you wish to disable the Individual Call
ringer, or “
GroupGroup
GroupGroup
Group” if you wish to disable the
Group Call ringer and press the
[
ENT
]
key.
6. Turn the CHANNEL selector knob to select
“
OffOff
OffOff
Off.”
7. Press the
[
ENT
]
key to store the selected set-
ting.
8. Press the
[
CLR
]
key twice to return to the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu, then press
the
[
CLR
]
key again to return to radio operation.
To enable the individual ringer tone, repeat the above procedure, turning the
CHANNEL selector knob to select “
OnOn
OnOn
On” in step “6” above.
11.5.4 Transmitting an Individual Call
This feature allows the user to contact another vessel with a DSC radio. This
feature is similar to calling a vessel on CH16 and requesting to go to another
channel.
Pre-Programmable Calling
1. Press the
[
CALL
(
MENU
)]
key. The “
DSC CallDSC Call
DSC CallDSC Call
DSC Call
MenuMenu
MenuMenu
Menu” will appear.
2. Turn the CHANNEL selector knob to select “
In-In-
In-In-
In-
dividualdividual
dividualdividual
dividual.” (To cancel, press the
[
CLR
]
key.)
3. Press the
[
ENT
]
key. The transceiver will beep,
and the “Individual directory” will appear.
4. Turn the CHANNEL selector knob to select the
“Individual” you want to contact.
5. Press the
[
ENT
]
key, then turn the CHANNEL
selector knob to select the operating channel
you want to communicate on and press the
[
ENT
]
key.
6. Press the
[
ENT
]
key again to transmit the individual
DSC signal.