Filter
Top Products
Page 43GX5500S
11.5.2 Setting up Individual Reply
Allows setting up the radio to automatically (default setting) or manually re-
spond to a DSC Individual call requesting you to switch to a working channel
for voice communications. When Manual is selected the MMSI of the calling
vessel is shown allowing you to see who is calling. This function is similar to
caller id on a cellular phone.
1. Press and hold down the
[
CALL
(
MENU
)]
key
until “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select
“
DSC SetupDSC Setup
DSC SetupDSC Setup
DSC Setup” menu.
3. Press the
[
ENT
]
key, then select “
Individual Re-Individual Re-
Individual Re-Individual Re-
Individual Re-
plyply
plyply
ply” with the CHANNEL selector knob.
4. Press the
[
ENT
]
key.
5. Turn the CHANNEL selector knob to select “
Au-Au-
Au-Au-
Au-
tomatictomatic
tomatictomatic
tomatic” or “
ManualManual
ManualManual
Manual.”
6. Press the
[
ENT
]
key to store the selected setting.
7. Press the
[
CLR
]
key twice to return to the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu, then press
the
[
CLR
]
key again to return to radio operation.
11.5.3 Setting up Individual/Group Call Ringer
When a Individual Call or Group Call is received the radio will produce a ring-
ing tone for 2 minutes. This selection allows the Individual Call ringer time to
be changed.
1. Press and hold down the
[
CALL
(
MENU
)]
key
until “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select
“
DSC SetupDSC Setup
DSC SetupDSC Setup
DSC Setup” menu.
3. Press the
[
ENT
]
key, then select “
IndividualIndividual
IndividualIndividual
Individual
RingerRinger
RingerRinger
Ringer” with the CHANNEL selector knob.
4. Press the
[
ENT
]
key.
5. Turn the CHANNEL selector knob to select
ringing time of a Individual Call.
6. Press the
[
ENT
]
key to store the selected setting.
7. Press the
[
CLR
]
key twice to return to the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu, then press
the
[
CLR
]
key again to return to radio operation.