Filter
Top Products
GX5500SPage 42
of the persons you wish to call, similar to a cellular phones telephone directory.
1. Press and hold down the
[
CALL
(
MENU
)]
key
until “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select
“
DSC SetupDSC Setup
DSC SetupDSC Setup
DSC Setup” menu.
3. Press the
[
ENT
]
key, then select “
Individual Di-Individual Di-
Individual Di-Individual Di-
Individual Di-
rectoryrectory
rectoryrectory
rectory” with the CHANNEL selector knob.
4. Press the
[
ENT
]
key.
5. Select “
AddAdd
AddAdd
Add” with the CHANNEL selector knob,
then press the
[
ENT
]
key.
6. Press the one of the Keypad keys to enter the first
letter of the name of the vessel or person you want
to reference in the directory.
Example: Press the
[
2
(
MEM
)]
key repeatedly to
toggle among the seven available characters asso-
ciated with that key:
22
22
2
Æ
AA
AA
A
Æ
BB
BB
B
Æ
CC
CC
C
Æ
aa
aa
a
Æ
bb
bb
b
Æ
cc
cc
c
Æ
22
22
2
....
If a mistake was made entering in the name, press-
ing the
[
CLR
]
key to delete the wrong character.
7. Press the
[
ENT
]
key to store the first letter in the name and step to the next
letter to the right.
8. Repeat step 6 and 7 until the name is complete. The name can consist of
up to eleven characters, if you do not use all eleven
characters press the
[
ENT
]
key to move to the next
space. This method can also be used to enter a blank
space in the name. If a mistake was made entering
in the name repeat pressing the
[
H/L
]
key until the wrong character is
selected, then enter the correct character.
9. After the eleventh letter or space has been entered, press and hold the
[
ENT
]
key to advance to the MMSI (Maritime Mobile Service Identity Num-
ber) number entry.
10. Enter the desired number by the keypad. If a mis-
take was made entering in the MMSI number re-
peat pressing the
[
H/L
]
key until the wrong number
is selected, then enter the correct number.
11. To store the data entered, press and hold the
[
ENT
]
key.
12. To enter another individual address, repeat steps 5
through 11.
13. Press the
[
CLR
]
key twice to return to the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu, then press
the
[
CLR
]
key again to return to radio operation.