Filter
Top Products
Page 77GX5500S
13.5.1 Lat/Lon or Time and SOG Display
Factory default is “Your Vessel’s Current Position,” however, following the steps
below the GPS Information can be changed to “Course Over Ground (COG).”
1. Press and hold down the
[
CALL
(
SET
)
MENU
]
key until “
RA-RA-
RA-RA-
RA-
DIO SETUPDIO SETUP
DIO SETUPDIO SETUP
DIO SETUP” menu appears.
2. Press the
[
CALL
(
SET
)
MENU
]
key, then select “
NAV DIS-NAV DIS-
NAV DIS-NAV DIS-
NAV DIS-
PLAYPLAY
PLAYPLAY
PLAY” with the
[
S
]
/
[
T
]
key.
3. Press the
[
CALL
(
SET
)
MENU
]
key.
4. Press the
[
T
]
or
[
S
]
key to select “
PosPos
PosPos
Pos (Your Vessel’s Cur-
rent Position)” or “
CruCru
CruCru
Cru (Course Over Ground).”
5. Press the
[
CALL
(
SET
)
MENU
]
key to store the data en-
tered, then press the
[
16/9
]
key to exit this menu and re-
turn to radio operation mode.