Filter
Top Products
E6581429
C-2
3
3.2 Setting/monitor modes
This inverter has following three setting/monitor modes.
(1) Top View Mode
When the inverter is powered on, it enters this mode first.
The top window displays the operating status.
In this mode, you can set a panel operation frequency, use a function key as the EASY key, and so on.
⇒ Refer to “3.3. Operation in Top View Mode”.
(2) Parameter Setup Mode
This mode allows you to set parameters.
⇒ Refer to “4. Searching and setting parameters”.
(3) Status Monitor Mode
This mode allows you to monitor various kinds of statuses and information, such as the operating status of the
inverter and information on the terminal board.
⇒ Refer to “5. Monitoring the operation status”.
The figures below show the top windows of these modes.
To change from one mode to another, press the [ESC] key.
*) When Quick mode is selected with
the EASY key, other windows are
displayed.
Parameter Setup Mode
Parameter Setup Mode
Category Selection
Top
Mon
History function
Basic Parameters
Extended Parameters
Changed Parameters
ESC
Top View Mode
FWD 60.0 Hz STOP
0.0 Hz
Lng
Quick ---
Top View Mode
Status Monitor Mode
Real-time information
Top Prm
Rotative direction FWD
Frequency reference 60.0Hz
Output current 0%
Input voltage 99%
Output voltage 0%
Status Monitor Mode
ESC
ESC