Filter
Top Products
E6581429
1
I
I. Safety precautions
Thoroughly familiarize yourself with the symbols and indications shown in “I. Safety Precautions,” of the instruction
manual E6581386 and below, and then continue to read manuals. Make sure that you observe all cautions given.
Q Transportation & installation
Caution
Mandatory
• Handle the inverter unit with a crane.
Lifting heavy inverters can cause injury to persons.
Taking care of safety for users, handle carefully in order not to damage the inverter.
Carefully lift up the inverter, hanging wires on the hanging bolts or holes on the top or bottom of the inverter.
Note 1: Always keep the two sling ropes in balance when lifting the inverter, and take care that unexpected
force does not apply to the inverter during lifting.
Note 2: Always protect the inverter with a cover when transporting it.
Note 3: Do not put your hand in the wiring port or do not hold it when transporting the inverter.
• The main unit must be installed on a base that can bear the unit's weight. If the unit is installed on a base
that cannot withstand that weight, the unit may fall resulting in injury.
• Install a mechanical brake whenever the motor requires a brake (device which retains the motor shaft).
Failure to do so could lead to injury to persons because the inverter itself has no function of mechanically
retaining the brake shaft.