Filter
Top Products
E6581429
A-3
1
Q Operation panel
Totally enclosed box type VF-PS1 series have a special operation panel.
(2)
(3) (4) (5)
(1)
(9)
(8)
(6)
(7)
(10)
(1): LCD panel
For explanation of windows displayed, see the next page.
(2) to (5): [F1] to [F4] function keys
The function of each function key varies depending on the window currently displayed.
⇒ Refer to the next page and “6. List of function key functions”
(6): [ESC] key
Each time this key is pressed, modes change from one to another. Also, pressing this key brings you back to the
window one level higher in the window hierarchy.
(7): [FWD/REV] key
Each time this key is pressed, the direction of operation changes between forward run and reverse run.
(To use this key, parameter settings need to be changed. ⇒ Refer to the next page.)
(8): [RUN] key
The drive starts operation.
(To use this key, parameter settings need to be changed. ⇒ Refer to the nest page.)
(9): [STOP/RESET] key
The drive stops operation.
(To use this key, parameter settings need to be changed. ⇒ Refer to the next page.)
In case the inverter has tripped, pressing this key twice in a row resets the inverter.
* If multiple commands are entered by pressing the three keys [F2], [F3] and [F4] or [ESC], [FWD] and [RUN] in
rapid succession, a stop command will be issued instead to stop operation.
(10): Control dial
In a menu window, turn the dial clockwise or counterclockwise to select a menu item (the item selected is
highlighted) and press the dial to confirm the menu item selected.
Turn the dial clockwise (+) to select an item that follows the item currently selected.
Turn the dial counterclockwise (-) to select an item that precedes the item currently selected.
Selecting a menu item by turning the dial clockwise or counterclockwise and confirm the item selected by
pressing the dial are referred to as “select/confirm an item.”
In a value setting window, turn the dial clockwise or counterclockwise to increment or decrement the value
displayed, and press the dial to confirm the value specified.*1
Turn the dial clockwise (+) to increment the value.
Turn the dial counterclockwise (-) to decrement the value.
Turning the dial clockwise or counterclockwise to increment or decrement the value displayed and pressing the
dial to confirm the value specified are referred to as “specify/confirm a value.”
*1: Some settings are executed only by tuning the control dial.