Filter
Top Products
E6581429
D-1
4
4. Searching and setting parameters
In the Parameter Setup Mode, you can set basic parameters and extended parameters.
This mode also allows you to use the history function (parameter “auh” in the manual E6581386) and the changed
parameter search function (parameter “gru” in the manual E6581386) easily by simply selecting the desired
function from a menu.
Functions of function keys
: Goes to the Top View Mode.
: Goes to the Status Monitor Mode.
Q When Quick mode is selected
The window shown in the figure right appears when Quick mode
is selected.
This window displays the parameter currently selected for Quick
mode.
Functions of function keys
: Goes to the Top View Mode.
: Displays the previous window.
: Displays the next window.
: Goes to the Status Monitor Mode.
4.1 Searching for the change histories of parameters (History function)
The change histories of recent 5 parameters can be displayed in a list form.
1. Select/confirm “History function” using the control dial.
The change histories beginning at the latest one are displayed.
If the number of change histories exceeds 5, the oldest history
is deleted.
Functions of function keys
: Goes to the Top View Mode.
Q In this window, settings can be changed.
By pressing the control dial, it displays the parameter setting window, in which you can change settings as
required.
⇒ For the steps to be followed, see the following pages.
F1
F2
F3
F4
F1
F4
F1
Parameter Setu
p
Mode
Cate
g
or
y
Selection
To
p
Mon
History function
Basic Parameters
Extended Parameters
Changed Parameters
Parameter Setu
p
Mode
Mon
Quick mode
To
p
A
U4 :Automatic function set
Pt :V/f control mode
FH :Maximum frequency
A
CC :Acceleration time 1
DEC :Deceleration time 1
F1 F4
F1 F2 F3 F4