Filter
Top Products
Teledyne API Model 465L O
3
Monitor Operation Manual
22 05509F DCN6409
Figure 4-1: NEMA AC Power Connection to Monitor
6. Connect the power cord to an appropriate power outlet (see the serial number tag for
correct voltage and frequency).
CAUTION
Verify that the instrument is set up for proper line voltage and
frequency. Observe local electrical codes when connecting power to the
monitor.
7. Turn on the M465L by switching the switch on the left side of the rear panel, or applying
power to the monitor (NEMA configuration.) The front panel display should light with a
sequence of messages, including the instrument serial number and software revision.
(When the instrument first powers up, the display will show ‘xxxx’, indicating that the
instrument is in start-up mode, waiting for the UV detector readings to stabilize)..
8. After the start-up period, the instrument will begin displaying the ozone concentration
and the optional stream selector will begin operating, if installed.