Filter
Top Products
975-0082-01-01 5
Introduction
Xanbus-Enabled Products and Accessories
The Freedom SW Inverter/Charger is a true sine wave inverter/charger that
can be used for mobile, marine and commercial applications. The Freedom
SW Inverter/Chargers are designed to operate with a wide variety of
generators and are capable of operating in parallel with a generator for short
durations to assist with starting large loads. The Freedom SW is a
convenient combination of an inverter, multistage battery charger, and
transfer switch in one electronic device.
The Xanbus SCP provides configuration and monitoring capability for a
Xanbus system. It monitors activity throughout your power system,
displays the settings and status, as well as, adjusting the settings for each
Xanbus-enabled device.
The Freedom Sequence Intelligent Power Manager is a fully integrated
power management system that provides automatic power and load
management for use in recreational vehicles (RV) while receiving power
from a generator or shore power.
Product/Accessory Product Number
Freedom SW Series Inverter/Charger 815-2012 (2kW power rating),
815-3012 (3kW power rating)
Freedom Sequence Intelligent Power
Manager
809-0913 (four-circuit model),
809-0912 (six-circuit model)
Xanbus System Control Panel (SCP) 809-0921
25-ft network cable for SCP 809-0940
75-ft network cable for SCP 809-0942
FREEDOM SW 3012
FREEDOM SW
3012
I
n
v
e
r
ter
Reset Enable
I
nverter AC/
On
Charge Fault
TM
Freedom SW
Inverter/Charger
SCP
Freedom Sequence
power manager
25-ft cable
75-ft cable