38 Xanbus Automatic Generator Start (AGS) Owner’s Guide
Configuration of the Xanbus AGS
The Xanbus Automatic Generator Start
(AGS) Menu
The Xanbus Automatic Generator Start (AGS) menu provides the ability to
configure the changeable parameters, select the generator’s operating mode,
clear fault warnings and view device information.
The Xanbus Automatic Generator Start (AGS) Menu Home Screen is
divided into five sections.
• Advanced Settings (Configuration Settings)
• GenMode (Manual on/Manual off/Automatic)
• Mode of Operation (Operating/Standby)
• Clear Fault Warnings
• View Device Info
Figure 31
AGS Basic Menu Contents
Xanbus System Control Panel (SCP)
FGA: 809-0921
AC In/Charge
Inverter On
Low Battery
Fault
STBY/ON
FaultC lear
TM
Enter Func
XAGS 00: Setup
Mode
Clear Faults Warnings
View Device Info
[Operating]
GenMode [ManualOff]
XAGS 00: Setup
Mode
Clear Faults Warnings
View Device Info
[Operating]
GenMode [ManualOff]
XAGS 00: Setup
Mode
Clear Faults Warnings
View Device Info
[Operating]
[ManualOff]
XAGS 00: Setup
Clear Faults Warnings
View Device Info
[Operating]
GenMode [ManualOff]
XAGS 00: Setup
Mode
View Device Info
[Operating]
GenMode [ManualOff]
XAGS 00: Setup
Mode
Clear Faults Warnings
[Operating]
GenMode [ManualOff]
Use these buttons to
move UP or DOWN.
To select the Generator
Starting Mode...
XanbusAGS Menu To configure...
To select the Device
Operating Mode...
To clear faults and
warnings...
To view device
information...
Press the ENTER button to
select the menu item.
Use these buttons to
change the settings.
Press the ENTER button
accepts the new setting.
Press the Func button to
return to the AGS Home.
Press the Func button to
return to the FSW System
Home Screen.
GenMode
Mode
XAGS 00: Setup
Clear Faults Warnings
View Device Info
Advanced Settings
GenMode [ManualOff]
XAGS 00: Setup
Mode
Clear Faults Warnings
View Device Info
[Operating]
XAGS 00: Setup
Clear Faults Warnings
View Device Info
GenMode [ManualOff]
GenMode
Mode
Clear Faults Warnings
View Device Info
[ManualOff]
[Operating]