Filter
Top Products
36 Xanbus Automatic Generator Start (AGS) Owner’s Guide
Configuration of the Xanbus AGS
Overview
The AGS has a number of settings that must be configured to ensure that
the generator starts and stops under the appropriate conditions and at the
appropriate time. The AGS is configured using the Xanbus System Control
Panel (SCP).
The Freedom SW System Home Screen on the Xanbus System Control
Panel (SCP) displays basic system operational status. On the lower left
corner of the Freedom SW System Home Screen, there is an arrow that
points to the Enter Button below the display. Pressing the Enter Button
when the Freedom SW System Home Screen is displayed will take the
system to the Select Device Menu.
The AGS Menu is accessed from the Select Device menu screen. All
configurable settings, generator mode, fault clearing, and device
information is provided in the AGS Menu.
Figure 28
Xanbus System Control Panel (SCP) Navigation Buttons and
Freedom SW System Home Screen
Xanbus System Control Panel (SCP)
FGA: 809-0921
AC In/Charge
Inverter On
Low Battery
Fault
STBY/ON
Fault Clear
TM
Enter Func
Func Button
Cancels
selection of a
menu item
Returns to the
previous screen
Enter Button
Confirms
selection of a
menu item
Moves to the
next screen
Up arrow
Scrolls up
one line of
text
Increases a
selected
value
Down arrow
Scrolls down
one line of text
Decreases a
selected value