Barcode Manipulation 137
E-EQ-MX3XRG-H MX3X Reference Guide
Factory Default Settings
Main
Bluetooth Disabled (Dimmed)
Output enable Disabled (Dimmed)
COM3 Disabled (Dimmed)
Keys
Left Scan key Scan
Right Scan key Enter key
COM Ports (COM1 - COM2 – COM3)
Baud Rate 9600
Parity None
Stop Bits 1
Data Bits 8
Power on Pin 9 (+5v) Disabled
Barcode
Enable Code ID None
Symbology Settings Enable Dimmed / Min - 1 to Max - all
AIM (ID) Enable Dimmed
Symbol (ID) Enable Dimmed
Custom Null
Control Character Disabled
Translate All Disabled
Character/Replacement NULl / Ignore(drop)
Custom Identifiers
Name Blank
ID Code Blank
Notes:
• If the internal scanner has to be configured to operate at any communication settings other
than 9600, N, 8, 1 and the MX3X either loses power or a cold boot command is entered,
the Scanner applet must be reconfigured to match the scanner communication settings.
• LXE 8300 Tethered Scanners and Symbology Settings (AIM ID) – Before manipulating
data received from 8300 tethered scanners, and Symbology settings are desired, the user
must configure and append the Symbology ID as a prefix.
• ActiveSync will not work over a COM port if that COM port is enabled in the Scanner
applet as scanner input. For example, if COM 1 is being used by the scanner, COM 1 can’t
be used by any other program.
• The MX3P does not have an integrated scanner or RFID capability.
