Technical Specifications 281
E-EQ-MX3XRG-H MX3X Reference Guide
Cable Specifications
Caution: Do Not Use this Port for Cables with
USB Plugs/Receptacles:
Caution: Do Not Use these Labeled Ports for
Tethered Scanners:
Cable Ends
Receptacle Plug Receptacle Plug
USB A USB A RS232 RS232
USB B USB B
Cable Pinouts and Diagrams
MX3X068CBLD9USBHOST – CBL, USB D9F to USB
Type A Receptacle
ActiveSync: Connect from mobile device USB-C port to
USB Type A Host. E.g. laptop/desktop PC.
Mobile Device Goes To USB Type A
Client End Plug End
1.........................Host Detect ........................ 1
2.........................Not Used
3.........................D+ .................................... 3
4.........................Not Used
5.........................GND ................................ 4
6.........................Not Used
7.........................D- ..................................... 2
8.........................Not Used
9 Not Used
MX3XA069CBLD9USBCLNT – CBL, USB D9F to
USB Type B Plug
Connect from MX3X USB-H port to USB Type B
device. e.g. Hub, camera, other client device, etc.
Mobile Device Goes To USB Type B
Host port End Plug End
1.........................Not Used
2.........................Not Used
3.........................D+ .................................... 3
4.........................Not Used
5.........................GND ................................ 4
6.........................Not Used
7.........................D- ..................................... 2
8.........................Not Used
9.........................PWR .................................. 1
