Summit Client Configuration 191
E-EQ-MX3XRG-H MX3X Reference Guide
PEAP/GTC Authentication
Start the Summit Utility by tapping the Summit Client icon.
Tap the Admin Login button on the main panel. Enter the Administrator password and tap OK.
Tap the Config tab.
Figure 5-21 Configure a Summit Profile with PEAP/GTC
Enter the SSID of the Access Point assigned to this profile. Set Auth Type to Open.
Set EAP Type to PEAP-GTC. Set Encryption to WPA TKIP.
To use Stored Credentials, tap the Credentials button.
Note: No entries are necessary for Sign-On Credentials as the user will be prompted for the
User name and Password when connecting to the network.
Figure 5-22 PEAP/GTC Credentials
Enter the Username or Domain\Username in the Credentials popup text entry box, if desired.
Enter the Password, if desired. Leave the CA Certificate Filename blank for now.
Tap OK. Tap Commit.
Once successfully authenticated, copy the CA certificate into the System directory of the device.
Once the certificate file is in the System directory, enter the filename in CA Certificate Filename
on the popup Credentials data entry box.
Tap OK. Tap the Commit button to save the new profile configuration.
Perform a Warm Reset function to connect using the new profile configuration.
Please see “Sign-on Screen for LEAP, EAP-FAST, PEAP/MS-CHAP, and PEAP/GTC” earlier in
this chapter if the username and password are left blank during setup.
