Technical Specifications 291
E-EQ-MX3XRG-H MX3X Reference Guide
Added new section titled “Connect External Power Supply to the MX3P”.
Added information and Accessories for the MX3P mobile device.
Chapter 2 – Physical
Description and Layout
Added “RTS/CTS Handshaking and the Serial Port”.
Chapter 3 – Power Supply
Corrected the following statement: “The MX3X is designed to achieve 8+ hours of
continuous operation.” The statement is now correct.
Chapter 4 – System
Configuration
Added intro information for JAVA option, RFTerm option, AppLock option and
Wavelink Avalanche option to “Installed Software”. Added Summit radio to “Start
Menu Program Options”. Added note to “Bluetooth Manager” and “Scanner/Main”:
“Bluetooth Manager, Bluetooth service or options are not available for all MX3X
devices or in all MX3X software releases.”
Revised “About” section to include pre-installed font information. Revised
“Date/Time” section. Revised “Password” section. Revised “Scanner” sections for
new features. Added new sections to Utilities: “Enabling GrabTime”, “Configuring
CapsLock Behavior”, “Configuring IPv6”, “Configuring Touch Panel Behavior”.
Revised “LAUNCH.EXE” section for Summit radio and new features. Expanded
“Reflash the Mobile Device” section to include Reflash TAG file process.
Chapter 5 – MX3-RFID
Removed Scanner tab explanations. Referred reader to Chapter 4, section titled
“Scanner” for explanation and instruction. Changed MX3-RFID IP rating from IP55
to IP65.
Chapter 6 – AppLock Added Multi Application AppLock instruction.
Chapter 7 – Wireless
Network Configuration
Added Summit Client Utility. Separated chapter into four sections: Summit, Cisco,
Symbol, and Certificates.
Appendix B – Technical
Specifications
Added “Revision History”. Removed USB A and USB B cable photos from “Cable
Specifications”.
Added Summit radio technical specifications.
Changed MX3-RFID IP rating from “dust and water protection enclosure rating of
IEC 60529 compliant to IP55” to “...IP65”.
Entire Manual
Clarified differences between MX3X, MX3P and MX3-RFID mobile devices, cradles,
batteries and chargers. Noted the replacement of SE923 scanner with SE955 scanner
(July 2006) where applicable. Updated Figures to display LXE 2005 logo.
Changed part numbers for cradles from 2381A002DESKCRADLE to
MX3RA002DESKCRADLE and 2381A003VMCRADLE to
MX3RA003VMCRADLE where applicable.
Revision E, November 2005
Chaper 1 – Introduction
Added Scanner Clip Strap (85XX scanners only) to “Accessories.” Deleted obsolete
tethered scanners.
Chapter 4 – System
Configuration
Updated Date/Time figure and instruction to explain Sync button function. Updated
“LAUNCH.EXE” in section titled “Utilities”.
Added “2.4GHz Radio Configuration” section and “Configuring IPv6 Broadcast
Messages.”
Removed “Cisco – Aironet Configuration Utility (ACU)” and “Symbol” sections. This
information is now included in Chapter 7.
Chapter 7 – Wireless
Network Configuration
Added new chapter containing ACU and Symbol sections removed from Chapter 4.
Added MX3X WPA information and instruction.
Revision D, April 2005
Front Page
Updated LXE Logo for 2005. Added “Microsoft Windows CE .NET Equipped” on
cover page to separate this device from similar MX3 mobile devices.
Chapter 4 – System
Configuration
Deleted “LXE RFID Config” from Start Menu.
Added “RFID Configuration Utility” to Control Panel section.
Added Avalanche “persist” keys to “Utilities” section “LAUNCH.EXE”.
