Symbol Client Configuration 215
E-EQ-MX3XRG-H MX3X Reference Guide
Disable WEP
• If WEP is to be disabled, tap the down arrow in the Authentication drop down box. Select
Open.
• Tap the down arrow in the Encryption drop down box. Tap Disabled and WEP is
disabled.
• Tap the OK button to return to the Wireless Information tab.
Enable WEP
• Tap the down arrow in the Authentication drop down box.
• Tap the WEP Authentication protocol.
• If the key is provided automatically by your network, check the “Key provided
automatically” checkbox.
• If you wish to enter your Authentication key, uncheck the “Key provided automatically”
checkbox and enter the Network Key in the Network Key text box.
• Tap the OK button to return to the Wireless Information tab.
Continue
Tap the Advanced … button. Make sure there is a checkmark in the “Use Windows to configure
my wireless settings” checkbox. Make sure there is no
checkmark in the “Automatically connect
to non-preferred networks” checkbox. Tap the Connect button.
Tap OK to return to the Wireless Information tab.
Tap the Connect button.
Figure 5-63 Symbol Advanced Wireless Settings
To access NETWLAN1 Properties again, tap the Network Connected icon in the Toolbar.
