Content Filtering and Optimizing Scans
239
ProSecure Unified Threat Management (UTM) Appliance
3. Click Apply to save your settings.
Configure FTP Content Filtering
To configure the FTP filters:
1. Select Application Security > FTP > FTP Filters. The FTP Filters screen displays:
Figure 133.
2. Enter the settings as explained in the following table:
Scan Exception
The default maximum size of the file or object that is scanned is 2048 KB, but you can define a maximum
size of up to 10240 KB. However, setting the maximum size to a high value might affect the UTM’s
performance (see Performance Management on page 428).
From the drop-down list, select one of the following actions to be taken when the file or message exceeds
the maximum size:
• Skip. The file is not scanned but skipped, leaving the end user vulnerable. This is the default setting.
• Block. The file is blocked and does not reach the end user.
Table 53. Anti-Virus screen settings for FTP (continued)
Setting Description
