Filter
Top Products
92
Trip Calculator: shows trip status and statistics.
Timers: controls the up timer, down timer and alarm clock settings.
Browse MMC Files: this allows you to view the installed MMC card
and the files it contains.
Pages
The unit has four Page displays for the four major operating modes. They
are the Satellite Status Page, the Navigation Page, Map Page and the
Sonar Page. They are accessed by pressing the
PAGES key, then using →
or ← to select a Page. (Clear the menu by pressing EXIT.)
Pages Menu showing some Map display options.
Sonar Page
The Sonar Page displays the sonar chart, a view of the water column
from the surface to the bottom. The chart scrolls across the screen from
right to left, displaying signal echoes that represent fish, structure and
the bottom. The Sonar Page is discussed in detail in Sec. 3. To get to
the Sonar Page, press the
PAGES key, then use → or ← to select SONAR.
(Clear the Pages Menu by pressing
EXIT.)
Satellite Status Page
The Satellite Status Page, shown, provides detailed information on the
status of the unit's satellite lock-on and position acquisition. To get to
the Satellite Status Page, press the
PAGES key, then use → or ← to
select
STATUS. (Clear the Pages Menu by pressing EXIT.)
No matter what Page you are on, a flashing current position
indicator/question mark symbol and flashing GPS data displays
indicate the satellite lock has been lost and there is no position
confirmed. The Satellite Status Page shows you the quality and
accuracy of the current satellite lock-on and position calculation.