Filter
Top Products
131
Main Menu (left); MMC File Browser (right).
Communications Port Configuration
The unit has one NMEA 0183 version 2.0 compatible communication
port. The Com Port Menu, which is accessed from the System Setup
Menu, allows you to configure the communications ports to send or
receive data to another electronic device, such as autopilot.
Menus for changing Com Port settings.
For assistance in configuring the unit to communicate with another
device, consult the factory. Customer service phone numbers are in the
back of this manual. Also see the entry below on how to Configure
NMEA. To set Com Port Configuration:
1. Press
MENU|MENU|↓ to SYSTEM SETUP|ENT.
2. Press
↓ to COMMUNICATIONS PORT|ENT.
Configure NMEA
You can configure the unit to use specific NMEA sentences.
1. Press
MENU|MENU|↓ to SYSTEM SETUP|ENT.
2. Press ↓ to
COMMUNICATIONS PORT|ENT|↓ to CONFIGURE NMEA|ENT.
3. A menu appears showing the prefixes of the available NMEA
sentences. A check mark next to a prefix means the prefix is in use.