Filter
Top Products
showntp(8)
376 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised November 2007
EXTENDED
DESCRIPTION
The setntp(8) command sets the NTP servers used in the XSCF network.
EXAMPLES
EXAMPLE 1 Displays all NTP servers being currently set.
EXAMPLE 2 Confirms synchronization with an NTP server and displays the results.
EXAMPLE 3 Displays the stratum value which has been set to XSCF.
EXIT STATUS The following exit values are returned:
SEE ALSO setntp(8)
XSCF> showntp -a
server ntp1.example.com prefer # [1] ntp server name
server ntp2.example.com # [2] ntp server name
XSCF>
showntp -l
remote refid st t when poll reach delay offset jitter
========================================================================
*192.168.0.27 192.168.1.56 2 u 27 64 377 12.929 -2.756 1.993
+192.168.0.57 192.168.1.86 2 u 32 64 377 13.030 2.184 94.421
127.127.1.0 LOCAL(0) 5 l 44 64 377 0.000 0.000 0.008
XSCF> showntp -s
stratum : 5
0 Successful completion.
>0 An error occurred.