Filter
Top Products
2–9
7) To store date as comment, press the [▼] key several times to
select ENTER and press the [NU/CU ENT] key. To change
comment, operate the [Arrow] keys to select character.
8) Press the [NU/CU ENT] key.
9) Repeat steps 7 and 8 to complete the comment.
Press the [CLR] key to correct wrong character. The character
left of the cursor is erased.
10) To terminate the comment, operate the [Arrow] keys to select
ENTER. To cancel the comment entered, press the [MENU
ESC] key.
11) Press the [NU/CU ENT] key.
12) Press the [MENU ESC] key to escape.
Entering waypoints at own ship’s position
1) Press the [WPT] key.
The menu for selection of waypoint entry method appears.
2) Press the [▲] key to select Own Position.
3) Press the [NU/CU ENT] key.
4) Change waypoint number, if desired.
5) Press the [▼] key to select mark shape and enter a comment as
explained in "Entering waypoints by the cursor," or press the
[NU/CU ENT] key to enter waypoint and escape.
Entering waypoints through the waypoint list
1) Press the [WPT] key.
2) Press the [▼] key to select WPT List.
3) Press the [NU/CU ENT] key. The waypoint list appears.
WAYPOINT LIST
No LAT/LONG COMMENT
001 BUOY
002 ANK
010 PORT
:Cursor CLR:Delete WPT
ENT:Edit MENU:Sel Mode
34° 45.567' N
135° 23.321' W
34° 45.231' N
135° 33.456' W
34° 42.316' N
135° 21.678' W
Figure 2-11 Sample waypoint list