Filter
Top Products
2–23
Figure 2-25 Marks connected with lines
To return to individual entry of marks, set LINE TYPE to "single
dot" in step 3 of the above procedure and then press the [MENU
ESC] key.
2.21 Entering Event Marks
The event mark is used to mark present position. It is useful for
denoting important locations, such as good fishing spots or wrecks.
You may enter 100 event marks.
The GP-1600F saves and numbers event positions from 001 to
100, 001 being the latest. When the event position memory be-
comes full several beeps are released when the [EVENT MOB]
key is pressed. To enter event marks, erase unnecessary event marks.
Enabling entry of event marks
To enable entry of event marks, do the following
1) Press the [MENU ESC] key.
2) Press the [0] key to select SYSTEM MENU.
3) Press the [2] key to select PLTR SETUP.
4) Press the [▼] or [▲] key to select EVNT METHOD.
5) Press the [s] key to select EVENT.
6) Press the [MENU ESC] key to escape.
Entering event marks
Press the [EVENT MOB] key. The event mark appears at present
position, in the shape selected on the TRACK/MARK SETUP
menu.