Filter
Top Products
2–24
2.22 Erasing Event Marks
1) Press the [CURS] key to turn on the cursor.
2) Press the [Arrow] keys to place the cursor on the event mark
you want to erase.
3) Press the [CLR] key.
2.23 Setting Event Position as Destination
1) Press the [GOTO] key. (If the EVENT List appears, go to step
5.)
2) Press the [MENU ESC] key.
3) Press the [▼] or [▲] key to select EVENT List.
4) Press the [NU/CU ENT] key. The event list appears.
5) Operate the [▼] or [▲] keys to select an event number.
6) Press the [NU/CU ENT] key.
2.24 Changing Event Mark Shape
1) Press the [MENU ESC] key.
2) Press the [2] key to select TRACK/MARK SETUP.
3) Press the [Arrow] keys to select EVENT MARK and shape
desired.
5) Press the [MENU ESC] key to close the menu.
2.25 The MOB Function
The MOB (Man OverBoard) function can be enabled on the DIS-
PLAY SETUP menu. When enabled, the [EVENT MOB] key func-
tions to mark man overboard position. The range and bearing to
the MOB position are continuously updated on the display, to help
you navigate to the MOB position.
Entering MOB mark
Press the [EVENT MOB] key over 3 seconds.