Filter
Top Products
4–3
5) Press the [NU/CU ENT] key.
6) Press the [MENU ESC] key.
Note: Avoid exceeding the default arrival alarm range (00.500 nm)
to prevent release of the alarm on a distant waypoint.
Disabling the alarms
Select OFF” in step 3 in "4.2 Enabling/Disabling the Alarms" and
then press the [NU/CU ENT] and [MENU ESC] keys.
4.3 Deleting Aural and Visual Alarms
When an alarm setting is exceeded, both aural and visual alarms
are released. You can silence the aural alarm and erase the visual
alarm by pressing the [CLR] key. The aural and visual alarms will
be generated at the next violation of the active alarm(s).