Filter
Top Products
125
Route: A Route is series of waypoints linked together in a specific sequence to define a navigation
path between two points, and saved in the fishfinder’s memory. Routes are often used when
frequently traveling between two or more locations because it is a faster and more accurate
method than repeatedly selecting individual waypoints each time one travels through the same
area. Routes consist of a Start Waypoint, an End Waypoint, and a series of waypoints in between.
Users can begin navigation at the beginning, the end (to run the route in reverse) or at any
waypoint in between. See Waypoint.
SD: SD is an acronym for Secure Digital. An SD card is virtually identical in function to an MMC;
however, the speed at which information can be accessed is generally faster, the storage capacity
is generally larger, and the card has security features which can be used to prevent extracting the
data from the card. SD is the same format that many digital cameras use. See MMC.
Selective Availability: Selective Availability (SA) is a GPS system “feature” that can be
implemented by the U.S. Department of Defense (DoD) to degrade the accuracy of GPS
positioning information. With SA active, the GPS is accurate to within 100 meters 95% of the
time. With SA inactive, the GPS is accurate to within 45 meters 95% of the time. Currently, SA is
inactive and the consumer can enjoy the greater precision GPS provides; however, the DoD
reserves the right to activate SA at any time.
Speed Over Ground (SOG): Speed Over Ground is the measurement of the boat’s progress across
a given distance, and is the speed measurement provided by GPS. An alternate, Speed Through
Water, is provided by a speed paddlewheel, and is the measurement of the flow past the boat,
which may vary depending on current speed and direction. Speed Over Ground is optimal for
navigation because accurate destination times can be derived from this measurement.
Humminbird® products allow for input and display of both speed measurements.
Time To Go (TTG): Time To Go is the estimated time required to reach the destination waypoint.
TTG is calculated using the SOG and DTG. See SOG and DTG.
Track: A Track is a series of saved points that define the past path of the boat. These Track Points
are saved at regular time intervals. Tracks are a useful and quick method to see where you’ve
been, and an easy guide to follow to get you back to the starting point. Generally, all GPS units
have a limited number of Track Points that can be saved before the unit runs out of memory and
begins erasing the first track points saved. Because of this, the user can adjust the Track Point
Interval menu to increase the amount of time between when points are saved, and thus extend
the distance covered by a track. Tracks can also be permanently saved to memory, and re-
displayed at the user’s option.
Track Line (TRK): The Track Line is the desired line of travel between two waypoints, and
represents the most efficient path between the two points because it is a straight line. The TRK
is measured in degrees (i.e. 321°, where 000° is North, 090° East, 180° is South, 270° is West).
See Cross Track Error, Course Over Ground.