Filter
Top Products
6
Your 700 Series™ supports Navionics® Gold, HotMaps™ and HotMaps™Premium on MMC or SD
card media.
NOTE: Your 700 Series™ does not support Navionics® Classic Charts, only Navionics® Gold,
HotMaps™, and HotMaps™ Premium.
Your unit also comes with a built-in World map.
Your 700 Series™ uses the optional-purchase GPS Receiver to determine the position of the boat
automatically, and uses the zoom level settings on a particular view to select the best chart to
display. See Viewing Cartography for more information.
Multi-Media Card (MMC)/SD Slot
Your 700 Series™ Fishing System also has a multi-media
card (MMC)/SD slot that is used to insert optional-
purchase cards containing additional detailed maps.
NOTE: MMC/SD cards require an optional-purchase GPS
receiver in order to function.
If you insert an MMC/SD that contains a more detailed chart for a particular location, your
700 Series™ Fishing System will retrieve that chart and display it automatically. Use the
illustration to locate the position of the MMC/SD slot cover, remove the MMC/SD slot cover,
then insert the MMC/SD into the slot. The label on the MMC/SD should face toward the right
side of the unit. Press down on the card until it clicks into place, then replace the slot cover,
making certain that the gasket is present and positioned correctly before re-installing the
cover, then replace and tighten snugly - do NOT overtighten, as this will not improve water
resistance, and may damage the cover.
Software Updates
Use the MMC/SD slot to update the software version of your control head. To update the
software in your control head, plug in the appropriate MMC/SD card that contains a software
update file; the unit will recognize it, will tell you what software version your control
head is currently running, and will ask you if you want to update the software in the unit
to match that on the MMC/SD card. You can obtain software updates from the
www.humminbird.com website.
Inserting an MMC/SD into the Card Slot