Filter
Top Products
40
GOTO Key
The GOTO Key has multiple functions, depending on the situation:
• If the Cursor is active, pressing the GOTO key while in any view creates a waypoint
and starts navigation towards that waypoint. If the Cursor is not active, pressing the
GOTO key displays the list of waypoints, so that you can select the waypoint towards
which you want to navigate.
• If the GOTO key is pressed and held for more than 1.5 seconds, the Man Overboard
(MOB) function is activated. When MOB is activated, an MOB waypoint, which is a
permanent, sharable waypoint with a large, distinctive icon, is created at the boat's
current position (regardless of whether the chart cursor is active or not). Any current
navigation will be cancelled and the current route discarded without user
notification, and MOB navigation begins immediately. The view is switched to the
Chart View automatically when MOB is activated, and it is not possible to activate
MOB or modify the current route without first canceling MOB navigation. Any press
of the GOTO key, or selection of a GOTO menu item, will cause an error beep and a
short message will be displayed to the user that will disappear after 2 seconds.
NOTE: The GOTO key only functions when you have purchased and connected a GPS receiver.
ZOOM (+/-) Key
Press the - or + ZOOM keys while in any of the Navigation Views or the
Sonar Zoom View to change the scale of the view to appear closer or
farther away.
EXIT Key
The EXIT key has multiple functions, depending on the situation:
• If an alarm is sounding, pressing EXIT will cancel the alarm.
• If a menu tab is selected, pressing EXIT will exit the menu mode and return to the view.
• If a menu is active, pressing EXIT will return to the previous level in the menu system.
• Pressing EXIT will cycle through the available views in reverse order.
• If Freeze Frame is active, pressing EXIT will return to a scrolling display.
• If the Cursor is active, pressing EXIT will remove the cursor from the display.