Filter
Top Products
33
Add a Waypoint Target or Trolling Grid
(with optional-purchase GPS receiver)
Add or Remove a Waypoint Target: From the Waypoints
submenu, select Target and press the RIGHT Cursor key to
display a list of waypoints. Select the waypoint you want to
target. A target consisting of concentric circles centered on
the selected waypoint will appear on all of the navigation
views; the target shows various distance ranges from the
targeted waypoint. To remove the target, choose Remove
Target from the Navigation X-Press™ menu.
Add or Remove a Trolling Grid: From the Waypoints
submenu, select Grid and press the RIGHT Cursor key to
display a list of waypoints. Select the waypoint to which
you want to add the grid. The trolling grid will appear on all
of the navigation views, and can be used as a guide when
trolling around a waypoint. The grid can be rotated to any
desired heading using Grid Rotation from the Navigation
Main menu. To remove the trolling grid, choose Remove
Grid from the Navigation X-Press™ menu.
NOTE: Only one waypoint can have either a target or a grid at one time. If you apply a target or a
grid to a new waypoint, the original waypoint will lose its target or grid.
NOTE: The spacing of the rings on the waypoint target and the spacing of the grid lines on the
trolling grid is the same as the length of the scale bar on the left edge of the display. Zooming in or
out will decrease or increase the spacing, respectively.
Save, Edit or Delete a Route (with optional-purchase GPS receiver)
Save the current route: While you are navigating, the current route can be saved. From the
Navigation X-Press
TM
menu, select Save Current Route and press the RIGHT Cursor key. Navigation
will continue.
Display the Routes submenu: From any view, press the MENU key twice to display the Main Menu
System, then use the RIGHT Cursor key to select the Navigation tab. Select Routes and press the
RIGHT Cursor key to display the Routes submenu.
Chart View with Grid
Waypoint
Trolling
Grid
Chart View with Target
Waypoint Target