Navionics 10C Marine GPS System User Manual


 
78
English
ARPA
Activate ARPA (ON/OFF)
Enables/disables the display of ARPA targets.
Set CPA/TCPA Limits (ON/OFF)
Sets the limits for CPA (Closest Point of Approach) and TCPA
(Time to Closest Point of Approach) alarms.
Offset GPS Radar (ON/OFF)
Sets the offset between the GPS unit and the radar an-
tenna.
SELECT CHART...
Selects the chart to load from the CompactFlash™. By se-
lecting ON, a window will show the catalog of the charts
stored in the cartridge. The chart currently loaded is marked
by an asterisk.
Select the new chart by the joystick and press ENTER to
confirm the selection or EXIT to exit. Press GOTO to display
the information associated with the chart.
Setup