Filter
Top Products
2004 Jan 26 3
Philips Semiconductors Product specification
MPEG-2 video and MPEG-audio/AC-3
audio encoder with multiplexer
SAA6752HS
1 FEATURES
1.1 Video input and preprocessing
• Digital YUV input according to
“ITU-R BT.656”
(8 bits at
27 MHz) and
“ITU-R BT.601”
• Support of enhanced
“ITU-R BT.656”
input format
containing decoded VBI data readable via I
2
C-bus;
Closed Caption (CC), Wide Screen Signalling (WSS)
and copyright information with Copy Generation
Management System (CGMS)
• Processing of non-broadcast video signals from analog
VCR according to IEC 756
• Two video clock input pins for switching two digital video
sources
•
“ITU-R BT.601”
format conversion to 1/2D1, 2/3D1 and
Standard Interchange Format (SIF)
• 4:2:2to4:2:0 colour format conversion
• Decimation filtering for all format conversions
• Adaptive median filter and motion compensated filter for
input noise reduction.
1.2 Video compression
• Real-time MPEG-2 encoding compliant to Main Profile
at Main Level (MP@ML) for 625 and 525 interlaced line
systems
• Supported resolutions: D1, 2/3D1, 1/2D1 and SIF
• IPB frame, IP frame and I frame only encoding
supported at all modes
• Supported bit rates: up to 25 Mbit/s I-only encoding;
up to 15 Mbit/s IP-only or IBP encoding.
• Variable video bit rate mode for constant picture quality
and constant bit rate mode to gain optimum picture
quality from a fixed channel transfer rate
• Access to bit rate control parameters whilst encoding to
support external real-time control algorithms (e.g.
constrained variable bit rate control)
• Programmable Group Of Pictures (GOP) structure
• Innovative motion estimation with wide search range
• Adaptive quantization
• Motion compensated noise filter.
1.3 Audio input
• Audio inputs: I
2
S format or EIAJ format (16, 18 or
20 bits), master or slave mode at 32, 44.1 and 48 kHz
• Two digital I
2
S input ports for selection between two
digital audio sources
• Audio clock generation: 256f
s
or 384f
s
(where
f
s
= 48 kHz) locked to video frame rate (if video is
present and locking is enabled)
• Sample rate conversion to 48 kHz (locked to video
frame rate if enabled) for slave mode operation in all
modes except Digital Versatile Disc (DVD) compliant
bypass.
1.4 Audio compression
• Dolby
(1)
Digital Consumer Encoding (DDCE) also
known as AC-3
(2)
2 channel audio encoding at
256 kbit/s or 384 kbit/s (only for SAA6752HS/V103)
• MPEG-1 layer 2 audio encoding at 256 kbit/s or
384 kbit/s
• Input data bypass for Linear Pulse Code Modulation
(LPCM) and compressed audio data [MPEG-1,
MPEG-2, Dolby
Digital (DD) and Digital Theatre
System (DTS)] according to IEC 61937
• Preamble Pc, Preamble Pd and bit stream information
captured for identification of modes during bypass of
compressed audio data for MPEG-1, MPEG-2, DD and
DTS according to IEC 61937
• Audio mute via I
2
C-bus control for all modes except
DVD-compliant bypass.
(1) Dolby is a registered trademark of Dolby Laboratories
Licensing Corporation.
(2) AC-3 is a registered trademark of Dolby Laboratories
Licensing Corporation.