Filter
Top Products
2004 Jan 26 55
Philips Semiconductors Product specification
MPEG-2 video and MPEG-audio/AC-3
audio encoder with multiplexer
SAA6752HS
This text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here in
_white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here inThis text is here in
white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader. white to force landscape pages to be ...
B3 I video PES ID R/W 8 bits E0H to EFH E0H Stream ID for video PES header; must be set
for TS, PS and PES output.
B4 I audio PES ID R/W 8 bits C0H to DFH C0H Stream ID for audio PES header; must be set
for TS, PS and PES output.
B5 I PES original
copy and
copyright
R/W 1 byte copy, no
copyright
Copy and copyright setting in audio and video
PES header.
bit0=1 original
bit0=0 copy
bit1=1 copyright
bit1=0 no copyright
B6 I multiplexer
special DVD PS
settings
R/W 1 byte 2 GOPs,
off,
metabyte,
0 (NAV
packet),
inserted
(PES
header)
bit[3:0] 1 to 15, number of
GOP/VOBU
The number of GOPs per VOBU for PS output.
bit4=0 metabyte output off Enables/disables the output of metabytes for
PS (DVD) and pack stream modes.
bit4=1 metabyte output on
bit[6:5] 0 to 3, time slot
reservation for NAV
packets
Specifies the number of reserved time slots for
navigation packets and DVD recorder data.
bit7=0 inserted Determines if the PES header extension is
inserted into the stream; this applies to
program stream and pack stream modes.
Remark: For DVD-compliance, the PES
header extension must be inserted.
bit7=1 not inserted
B7 I audio substream
ID
R/W 1 byte − 00 audio substream ID; for PS (DVD) or PES
(DVD) only
B8 E current system
bit rate
R 2 bytes −−Current system bit rate of the system stream in
kbit/s (= 1000 bit/s); applies for PS and TS
modes. The parameter includes the number of
stuffing bytes. During pause mode, this
address will read back the value of the last
GOP before the pause command.
B9 I enable MPEG
end code
R/W 1 byte disable Enables the MPEG end code (for program
stream only).
bit0=1 enable
bit0=0 disable
ADR
HEX
M
COMMAND
NAME
R/W SIZE/POSITION PARAMETER/RANGE DEFAULT DESCRIPTION