Filter
Top Products
2004 Jan 26 56
Philips Semiconductors Product specification
MPEG-2 video and MPEG-audio/AC-3
audio encoder with multiplexer
SAA6752HS
This text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here in
_white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here inThis text is here in
white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader. white to force landscape pages to be ...
Note
1. The limit for I-frame only is 27 Mbit/s. For IP or IPB formats the limit is 16 Mbit/s.
Table 25 I
2
C-bus multiplexer: transport stream (static settings)
ADR
HEX
M
COMMAND
NAME
R/W SIZE/POSITION PARAMETER/RANGE DEFAULT DESCRIPTION
C0 I video TS packet
ID
R/W 2 bytes 0020H to 1FFEH 0100H Packet ID for transport stream packets
containing video data; for TS only.
C1 I audio TS packet
ID
R/W 2 bytes 0020H to 1FFEH 0102H Packet ID for transport stream packets
containing audio data; for TS only.
C2 I system
information
tables
W 189 bytes
(maximum
value); up to
5 separate tables
first byte is table number
range (0 to 4) + array of
maximum 188 bytes
values
− There are 5 different tables followed by an array
of up to 188 bytes.The tables must be sent one
by one; the size of the tables is not defined but
limited to 188 bytes.
Table 0: Program Association Table (PAT)
Table 1: Program Map Table (PMT)
Table 2: free programmable [e.g. Conditional
Access Table (CAT)]
Table 3: free programmable [e.g. Network
Information Table (NIT)]
Table 4: free programmable [e.g. Selection
Information Table (SIT)]
C3 I TS
miscellaneous
R/W 1 byte 00H A discontinuity information table is inserted at
the beginning of the stream (after a stop of
recording).
bit0=0 DIT insertion disabled
bit0=1 DIT insertion enabled
bit1=0 constant TS bit rate At constant TS bit rate mode null packets are
delivered at the multiplexer output to achieve
the constant TS bit rate.
bit1=1 variable TS bit rate At variable TS bit rate mode no null packets are
inserted at the multiplexer output. This mode
can be used in combination with variable video
bit rate.
C4 I clock TS packet
ID
R/W 2 bytes 0020H to 1FFEH 0104H Packet ID for transport stream packets
containing PCR values; for TS only.