Filter
Top Products
8 ST1000 Plus & ST2000 Plus Tiller Pilots - Owner’s Handbook
2 Using the Tiller Pilot
2.2 Using Auto mode
Engaging the autopilot (Auto mode)
1. Steady the boat on the required heading.
2. Place the pushrod over the tiller pin. If necessary, extend or retract
the pushrod using the
-1, +1, -10, and +10 keys.
3. Press
auto: the tiller pilot will enter Auto mode and the display
will show an ‘
A’ (for auto) alongside the locked autopilot heading.
Disengaging the autopilot (Standby mode)
To return to hand steering:
1. Press
standby.
2. Remove the pushrod from the tiller pin to return to hand steering:
the display will show a flashing ‘
C’ and the boat’s current
compass heading.
3. The last heading is memorized and can be recalled (see page 11).
D354-2
D353-2
81130_3.book Page 8 Wednesday, July 25, 2001 11:57 AM