Filter
Top Products
Chapter 4: Installing the Tiller Pilot 39
4 Installing the Tiller Pilot
3. Select the appropriate pushrod extension length (and part
number) using the following table.
Mounting the pushrod extension
To mount the pushrod extension:
1. Unscrew the end of the tiller pilot’s pushrod.
2. Screw the extension into the pushrod.
3. Screw the pushrod end into the pushrod extension.
Dimension C Pushrod extension length L Part no.
589 mm (23.2 in) Standard dimension -
615 mm (24.2 in) 25 mm (1 in) D003
640 mm (25.2 in) 51 mm (2 in) D004
665 mm (26.2 in) 76 mm (3 in) D005
691 mm (27.2 in) 102 mm (4 in) D006
716 mm (28.2 in) 107 mm (5 in) D007
742 mm (29.2 in) 152 mm (6 in) D008
D3193-2
L
C
81130_3.book Page 39 Wednesday, July 25, 2001 11:57 AM