Filter
Top Products
Chapter 4: Installing the Tiller Pilot 45
4 Installing the Tiller Pilot
4.3 Cabling and socket installation
Both power and data are supplied to the tiller pilot via a waterproof
plug and socket. The plug comes ready assembled and the socket can
be mounted in the cockpit area adjacent to the tiller pilot.
Mounting the socket
Install the tiller pilot socket as follows:
1. Attach the template (provided at the back of this handbook) to the
selected bulkhead.
2. Carefully drill a 21 mm (
53
/
64
in) clearance hole for the cable boss.
3. Drill 4 pilot holes (2.5 mm or
3
/
32
in) for the self-tapping screws.
D305-3
+12 V DC (brown, pin 1)
0 V (blue, pin 2)
NMEA + (white, pin 6)
NMEA - (green, pin 5)
SeaTalk data (yellow, pin 4)
D3296-2
Cable
Gasket
Socket
Rubber cap
Screw
Plug
Floating nut
Retaining ring
Installed socket
81130_3.book Page 45 Wednesday, July 25, 2001 11:57 AM