Filter
Top Products
24 ST1000 Plus & ST2000 Plus Tiller Pilots - Owner’s Handbook
2 Using the Tiller Pilot
Exiting WindTrim mode
To exit WindTrim mode:
• press
standby to return to Standby mode
• press
auto to return to Auto mode
Returning to the previous apparent wind angle
If you have steered the boat away from the selected apparent wind
angle (for example, performing a dodge maneuver or selecting
Standby) you can return to the previous apparent wind angle:
1. Press and hold standby and auto together for 1 second.
2. The display flashes the previous locked heading for 10 seconds.
3. While the display is flashing, press
standby and auto together
to select the previous heading:
• when you select the previous heading, the “
W” flashes for 10
seconds to confirm the selection
Wind shift alarm
If changes in apparent wind angle alter the original locked compass
heading by more than 15°, the wind shift alarm will sound.
The display alternates between the current WindTrim heading and the
direction of wind shift.
D360-3
D209-2
81130_3.book Page 24 Wednesday, July 25, 2001 11:57 AM