Filter
Top Products
Chapter 4: Installing the Tiller Pilot 49
4 Installing the Tiller Pilot
Remote control cabling
If required, you can operate the tiller pilot using:
• a full-function ST600R remote control unit (part no: A12016), or
• a SeaTalk hand-held remote control (part no: Z101)
The following illustration shows how to connect a remote control.
NMEA cabling
If required, you can connect a NMEA navigator or wind instrument to
the tiller pilot. It can then use this information for Track and
WindTrim modes.
Recognized NMEA data
The following table lists the recognized NMEA sentences.
D3279-2
Supply (0 V)
Supply (+12 V DC)12 A fuse
Socket
SeaTalk cable
SeaTalk
cable*
Yellow (SeaTalk data)
Screen (SeaTalk 0 V)
Red (SeaTalk 12 V)
with 5 A fuse
SeaTalk
instruments
SeaTalk
socket
Z101 remote
ST600R remote
or
*If you only need to connect a remote, wire
this SeaTalk cable into the tiller pilot socket
81130_3.book Page 49 Wednesday, July 25, 2001 11:57 AM