Filter
Top Products
GX3000EPage 32
switch to activate the tone through the HAIL/PA
speaker.
Rotate the CHANNEL selector knob to control the
AF output level. The AF output level can be set from
0 to 30 watts.
6. To exit the FOG HORN mode, press the
[
PA/FOG
]
or
[
CLR
]
key.
8.14 NAVIGATION INDICATION
The transceiver has the ability to display Time, SOG, COG, as well as the posi-
tion (LAT/LON), when connected to a GPS receiver.
1. Press and hold the
[
H/L
(
NAV
)]
key, display the posi-
tion information on the LCD. If the GPS receiver is
not receiving a fix, the display will be as shown in the
illustration on the right.
NOTE: When Ch16 is selected only lat/lon will shown.
2. To hide the position information, press and hold the
[
H/L
(
NAV
)]
key again.
8.15 INTERCOM OPERATION
Connecting a CMP25 RAM+ or VH-310 handset to the GX3000E allows inter-
com communications. Refer to section “11.3 INTERCOM OPERATION” for
CMP25 RAM+ Microphone or section “12.3 INTERCOM OPERATION” for VH-
310 Handset.
DISTRESS
PULL OPEN
SCAN DW
NAV
WX
CALL
SET
MEM IC
U.I.C
M
E
N
U
16
9
MATRIX RAM 1
Ù
RAM 1
RAM 2
DISTRESS
PULL OPEN
SCAN DW
NAV
WX
CALL
SET
MEM IC
U.I.C
M
E
N
U
16
9
MATRIX RAM 2
Ù
RAM 1
RAM 2
DISTRESS
PULL OPEN
SCAN DW
NAV
WX
CALL
SET
MEM IC
U.I.C
M
E
N
U
16
9
RAM 1 RAM 2
Ù
RAM 1
RAM 2
DISTR ESS
PULL OPEN
SCAN DW
NAV
WX
CALL
SET
MEM IC
U.I.C
M
E
N
U
16
9
ALL
RAM 1
RAM 2