Filter
Top Products
GX3000EPage 54
The GX3000E has the capability to turn off the Position Request ringer.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select “
DSCDSC
DSCDSC
DSC
SetupSetup
SetupSetup
Setup” menu.
3. Press the
[
ENT
]
key, then select “
DSC BeepDSC Beep
DSC BeepDSC Beep
DSC Beep” with the
CHANNEL selector knob.
4. Press the
[
ENT
]
key.
5. Turn the CHANNEL selector knob to select “
POSPOS
POSPOS
POS
RequestRequest
RequestRequest
Request.”
6. Turn the CHANNEL selector knob to select “
OffOff
OffOff
Off.”
7. Press the
[
ENT
]
key to store the selected setting.
8. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.
If you wish to return to enabling the ringer tone, just re-
peat the above procedure, turning the CHANNEL selec-
tor knob to select “
OnOn
OnOn
On” in step “6” above.
9.8.2 Transmitting a Position Request to Another Vessel
Pre-Programmable Request
1. Press the
[
CALL
(
MENU
)]
key. The “
DSC OperationDSC Operation
DSC OperationDSC Operation
DSC Operation”
menu will appear in the display.
2. Turn the CHANNEL selector knob to select “
POS Re-POS Re-
POS Re-POS Re-
POS Re-
questquest
questquest
quest
.”
3. Press
[
ENT
]
key to show the Position request direc-
tory. This directory uses the INDIVIDUAL Directory
information.
4. Turn the CHANNEL selector knob to select a name,
then press the
[
ENT
]
key.
5. Press the
[
ENT
]
key to transmit the position request
DSC call.
6. When the GX3000E receives the position from the
polled vessel it is shown on the radio display and
also transferred to the GPS Chart plotter.
7. If the GX3000E does not receive a reply, the display
will be as shown in the illustration on the right. To
send again, press the
[
ENT
]
key.