Filter
Top Products
GX3000EPage 76
11.5 DSC/RADIO SETUP MODE
The RAM+ can access the DSC / RADIO setup menu (refer to section “9 DIGI-
TAL SELECTIVE CALLING” and section “10 RADIO SETUP MODE” for de-
tails). The
LAMPLAMP
LAMPLAMP
LAMP,
CONTRASTCONTRAST
CONTRASTCONTRAST
CONTRAST, and
KEY BEEPKEY BEEP
KEY BEEPKEY BEEP
KEY BEEP menu item accessed from the
RAM+ only controls the RAM+’s display and speaker.
DSC/RADIO Setup mode from the RAM+:
1. Press and hold down the
[
CALL
(
ENT
)]
key until “
RADIO SETUPRADIO SETUP
RADIO SETUPRADIO SETUP
RADIO SETUP” menu
appears.
2. Press the
[
S
]
/
[
T
]
key to select “
RADIO SETUPRADIO SETUP
RADIO SETUPRADIO SETUP
RADIO SETUP” or “
DSC SETUPDSC SETUP
DSC SETUPDSC SETUP
DSC SETUP” menu.
3. Press the
[
CALL
(
ENT
)]
key, then select the menu item you wish to work on
by pressing the
[
S
]
/
[
T
]
key.
4. Press the
[
CALL
(
ENT
)]
key.
5. Press the
[
S
]
/
[
T
]
key to change the value or condition for the menu item,
then press the [CALL
(
ENT
)
] key to save the new setting.
6. Press the
[
S
]
/
[
T
]
key to select “
EXITEXIT
EXITEXIT
EXIT,” then press the
[
CALL
(
ENT
)]
key to
return to the normal operation.
RADIO SETUP-menu DSC SETUP-menu
NOTE
When setup menu is selected, the GX3000E will be temporarily disabled
until the RAM+ mic, exits from the setup mode.