Filter
Top Products
GX3000EPage 74
11.3 INTERCOM OPERATION
11.3.1 Communication
1. Press and hold the
[
DW
(
IC
)]
key while in “RADIO” mode,
the mode is changed to “INTERCOM” mode.
2. If your GX3000E is equipped with two RAM+ Mic’s (or VH-
310 Handset), select the companion with which you wish to
communicate (
RADIORADIO
RADIORADIO
RADIO,
RAMRAM
RAMRAM
RAM, or
ALLALL
ALLALL
ALL) with the
[
S
]
or
[
T
]
keys,
then press the
[
CALL
(
ENT
)]
key.
3. When the “INTERCOM” operation is activated, “IC” is dis-
played on the RAM+ Mic (and VH-310
Handset) and “INTERCOM” is dis-
played on the GX3000E.
4. Press the PTT switch, “TALK” is dis-
played.
NOTE: A warning beep is emitted when
the RAM+ Mic PTT switch is also be-
ing pressed while the transceiver
microphone’s PTT switch is pressed.
5. Speak slowly and clearly into the microphone, hold the microphone about
1.5 cm away from your mouth.
6. When finished, release the PTT switch.
7. Press the
[
DW
(
IC
)]
key momentarily, and the mode will revert to “RADIO”
mode.
11.3.2 Calling
Hold down the
[
DW
(
IC
)]
key for 1 second or more, when the “INTERCOM”
operation is activated. A calling beep is emitted twice from the called unit.
(
RAM+ Mic’s PTT switch is pressed
)
(
GX3000E’s PTT switch is pressed
)