Filter
Top Products
Page 73GX3000E
11.2 PA/FOG OPERATION
The RAM+ is capable of controlling the 30W Public address, 4 fog horns, bells
and whistles.
11.2.1 Operating the PA / Hailer
1. Press and hold the
[
NAV
]
key then select “
PUBLIC ADRESSPUBLIC ADRESS
PUBLIC ADRESSPUBLIC ADRESS
PUBLIC ADRESS”
with the
[
S
]
or
[
T
]
key.
2. Press the
[
CALL
(
ENT
)]
key.
3. Press the PTT switch and speak into the microphone.
4. To turn up the PA Volume, press the PTT switch and press
the
[
S
]
or
[
T
]
keys to adjust the Audio output level. The
level can be set from 0 to 30W.
5. To adjust the listen back volume, (while in listenback mode)
press the
[
VOL
]
Key, then press the
[
S
]
or
[
T
]
key to the
desired listen back volume.
To exit from the PA / Hailer mode, press and hold down the
[
NAV
]
key again.
11.2.2 Operating the FOG Horn
The GX3000E is capable of sending Underway, Stop, Sail, Tow, Horn, Siren,
Aground and Anchor signals.
1. Press and hold the
[
NAV
]
key then select “
FOGFOG
FOGFOG
FOG” with the
[
S
]
or
[
T
]
key.
2. Press the
[
CALL
(
ENT
)]
key.
3. Select the one of the eight functions described above with
the
[
S
]
or
[
T
]
key and press the
[
CALL
(
ENT
)]
key.
4. On the “
HornHorn
HornHorn
Horn” and “
SirenSiren
SirenSiren
Siren” modes, press the PTT switch to
activate the tone through the HAIL/PA speaker.
Press the
[
S
]
or
[
T
]
keys to adjust the Audio output level.
The level can be set from 0 to 30W.
5. To adjust the listen back volume, (while in listenback mode)
press the
[
VOL
]
Key, then press the
[
S
]
or
[
T
]
key to the
desired listen back volume.
To exit from the FOG HORN mode, press and hold down the
[
NAV
]
key again.