Filter
Top Products
GX3000EPage 86
12.5.1 Changing GPS Information to Vessel position or COG
Allows customising of the NAV data showing GPS Information. Factory default
is “Your Vessel’s Current Position,” however, following the steps below the GPS
Information can be changed to “Course Over Ground (COG).”
1. Press and hold down the
[
CALL
(
MENU
)]
key until “
RADIORADIO
RADIORADIO
RADIO
SETUPSETUP
SETUPSETUP
SETUP
” menu appears.
2. Press the
[
ENT
]
key, then select “
NAV DISPLAYNAV DISPLAY
NAV DISPLAYNAV DISPLAY
NAV DISPLAY” with the
[
S
]
/
[
T
]
key.
3. Press the
[
ENT
]
key.
4. Press the
[
T
]
or
[
S
]
key to select “
PosPos
PosPos
Pos (Your Vessel’s Cur-
rent Position)” or “
CruCru
CruCru
Cru (Course Over Ground).”
5. Press the
[
ENT
]
key to store the data entered, then press
the
[
16/9
]
key to exit this menu and return to radio operation
mode.
12.5.2 External Speaker AF Selection
The
AF SELECTAF SELECT
AF SELECTAF SELECT
AF SELECT menu allows you to set the audio output level of the VH-310’s
External Speaker to “fixed” regardress of the VOL level setting of the VH-310,
which is useful when using an amplified speaker, such as the Standard Horizon
MLS-310.
1. Press and hold down the
[
CALL
(
MENU
)]
key until “
RadioRadio
RadioRadio
Radio
SetupSetup
SetupSetup
Setup
” menu appears.
2. Press the
[
ENT
]
key, then select “
AF SELECTAF SELECT
AF SELECTAF SELECT
AF SELECT” with the
[
S
]
/
[
T
]
key.
3. Press the
[
ENT
]
key.
4. Press the
[
S
]
or
[
T
]
key to select “
PrPr
PrPr
Pr” (External Speaker
Level is “Fixed”) or “
PoPo
PoPo
Po” (External Speaker Level is “Adjust-
able”).
5. Press the
[
ENT
]
key to store the data entered, then press
the
[
16/9
]
key to exit this menu and return to radio operation
mode.